技術情報
- 製品コード
- CRXCONEC Cat8
CRXCONEC Cat8規格/TIA-568.2-Dは、ネットワークケーブルソリューションの新しい標準を提供し、次の新しい時代に二重段階の銅ケーブルを取ります。
Cat8.1 の規則は RJ45 インターフェイスを続けます、チャネルの連結の 30M の短い間隔を伝達し、40G の伝達を支える機能を提供します。
Cat 8 ワイヤレスマップは、主にデータセンターで使用されます。そのため、新しいデータセンターを構築する際には、ケーブル構造システム用の CAT CAT.8 ケーブルを使用して、将来的により高い帯域幅を満たします。
特長
- GHMT CAT8のチャネルの性能は確認しました。
- IEC61156-9 CAT8.2ケーブルの条件と迎合的。
- IEEE802.3bt PoEタイプIII 60WおよびIV 100Wの塗布。
- 22AWG固体銅線、皮Foam皮のポリエチレンの分離OD 1.64mm。
- 各組のまわりのアルミ ホイル、錫は全面的なスクリーンのための銅の編組をめっきしました。
- CM、LSZH (IEC60332-1-2/IEC 60332-3-24)およびCM-LSZHの二重評価されたジャケットは利用できます。
- OD 8.4mm.
用途
Crxconec CAT.8 LANケーブルはキーストーン・ジャックおよびパッチ・パネル、フェースプレートおよび表面の台紙箱のような別の出口と、RJ45猫8 STP RJ45のコネクターは2000MHZ (2GHZ)頻度を、非常に指定のために行なわれた24-26 AWGワイヤー ゲージ ケーブルと適用できます、それは通常データ中心か屋内働く区域で使用されます。
材料及び構造
コンダクター: ベール銅、22AWG 0.63mm
絶縁材: 皮泡皮のPE、OD 1.65mm
ホイル スクリーン: アルミニウム/ペット、T=50/12 μm
Braid: Tinned Copper, 0.1mm x 6 x 16, Min. 45% Coverage
ドレイン ワイヤー: N/A
外装:ポリ塩化ビニールのCMかCMR、かLSZH、T=0.75mm、OD 8.4 ± 0.2mm
GHMT は Cat.8 の銅システム証明を検証しました
CRXCONEC Cat.8 チャネル リンクは、ドイツで評判の研究所 GHMT によって独自に認定され、30M の下の 2 つのコネクタ チャネルに基づいて、クラス I ISO/IEC TR 11801-9901 Ed.1.0 (2014-08) の標準に従います。
フラクテストレポート
CRXCONEC Cat.8 LANケーブルはISO標準とTIA規格のフラクテストを通過し、長さメーターと長さメーターの両方を渡すことができます。
Cat.8 チャネル構成
以下はCRXCONEC Cat.8チャンネルリンクデモンストレーションで30M以下のチャネルリンクで高速なアプリケーションです。
パッケージング
CRXCONEC Cat.8 lan cable has been packed by plastic wrap, and it is combined with 50m or 100 for one roll, it is according to the customer's request, each rope has its own box, and also you can pack your lan cable with wooden reel, it can let your cable much easier to manage.
技術資料の原文(ベトナム語または英語)
- Mã sản phẩm
- CRXCONEC Cat8
CRXCONEC Cat8 theo tiêu chuẩn ANSI / TIA-568.2-D, cung cấp một tiêu chuẩn mới cho giải pháp cáp mạng và đưa cáp đồng xoắn đôi bước vào kỷ nguyên mới tiếp theo.
Quy định Cat8.1 tiếp tục giao diện RJ45, cung cấp khả năng truyền khoảng cách ngắn 30M trong liên kết kênh và hỗ trợ truyền 40G.
Sơ đồ đi dây Cat 8 sẽ được sử dụng chủ yếu trong trung tâm dữ liệu. Vì vậy khi xây dựng một trung tâm dữ liệu mới, nên sử dụng cáp ethernet CAT.8 cho hệ thống cấu trúc cáp để đáp ứng băng thông cao hơn trong tương lai.
Features
- GHMT CAT8 channel performance verified.
- Complied with the IEC61156-9 CAT8.2 cable requirement.
- IEEE802.3bt PoE type III 60W and IV 100W applications.
- 22AWG solid copper wire, Skin-Foam-Skin Polyethylene isolation OD 1.64mm.
- Aluminum foil around each pair, Tin plated copper braid for overall screen.
- CM, LSZH (IEC60332-1-2 / IEC 60332-3-24) and CM-LSZH dual rated jacket are available.
- OD 8.4mm.
Applications
Crxconec CAT.8 Lan cable could apply with different outlet such as keystone Jack and patch panel, faceplate and surface mount box, RJ45 Cat 8 STP RJ45 Connector is applicable with 24-26 AWG wire guage cable performed 2000MHZ(2GHZ )frequency, because of the highly specification, it usually used in the Data center or indoor working area.
Material & Structure
Conductor: Bare Copper, 22AWG 0.63mm
Insulation: Skin-Foam-Skin PE, OD 1.65mm
Foil Screen: Aluminum / PET, T=50/12 μm
Braid: Tinned Copper, 0.1mm x 6 x 16, Min. 45% Coverage
Drain Wire: N/A
Sheath: PVC CM or CMR, or LSZH, T=0.75mm, OD 8.4 ± 0.2mm
GHMT Verified Cat.8 Copper System Certification
CRXCONEC Cat.8 channel link are independently certified by reputed laboratories GHMT in Germany, based on 2 Connector channel under 30M and follow the standard of Class I ISO/IEC TR 11801-9901 Ed.1.0 (2014-08).
Fluke Test Report
CRXCONEC Cat.8 lan cable pass fluke test with ISO standard and TIA standard, we can pass both long length meters and short length meters.
Cat.8 Channel Configuration
Here below is CRXCONEC Cat.8 channel link demonstration, it is a channel link under 30M with high speed application.
Packaging
CRXCONEC Cat.8 lan cable has been packed by plastic wrap, and it is combined with 50m or 100 for one roll, it is according to the customer's request, each rope has its own box, and also you can pack your lan cable with wooden reel, it can let your cable much easier to manage.

